Does the Highbay Light Replace the Traditional Energy-Saving Light?

Due to the research data, the energy consumption of the most advanced LED Highbay light can be as low as less than one-twentieth of traditional bulbs and the durability is 10 times and 100 times that of fluorescent lamps and incandescent lamps, and the lighting effect is more stable.

Nowadays, the industry is calling for the use of LED Highbay lights, but the price of high-bay lights is much higher than that of ordinary energy-saving lamps.

Why should we use LED Highbay light to replace energy-saving luminaries?

Let's look at the differences between them.

1. The power consumption of ordinary energy-saving is relatively large, which is more than 3 times that of LED Highbay light. In terms of energy conservation and environmental protection, energy-saving lamps have fallen behind the times.

2. The traditional energy-saving lights contain mercury, and if the luminaries are damaged, it will affect people's safety.

3. The average life of ordinary energy-saving lamps is only 1 year, while the LED Highbay luminaires can reach 50,000 hours.

4. Ordinary energy-saving lights emit only white and warm colors, and the Highbay lights are all-solid luminous bodies, solid cold light sources, rich and colorful luminous colors, such as white, yellow, blue, etc.

5. LED Highbay lights are not only environmental protection but also equipped with the advantages of being shockproof, waterproof, Mirco, high brightness, easy dimming, and so on.

It is not difficult to see the advantages of LED Highbay lights will be greatly developed soon, slowly replacing energy-saving lamps.

There are six characteristics of the Highbay light.

Firstly, the Highbay lights are more environmentally protective and energy-saving lights, lifespan can be over 30,000 hours.

Secondly, under the front embankment of the same brightness, the 70W LED Highbay light saves 60% of electricity than the 175W high-pressure sodium lamp.

Thirdly, most of the Highbay light sources use the chip of United States companies, high efficiency, small light decay, large current margin, the rated current of the chip is 700mA, the actual use of only 310mA, good heat dissipation design, solid crystal is using soldering solder. The thermal resistance is small, and the operating temperature of the chip is low. The actual junction temperature is less than or equal to 50℃, thus ensuring the stability and long life of the work.

Fourth, about 80% of the energy of LED lights is converted into heat energy, so with the increase of LED power and integration, the heating heat flux of LED increases rapidly, and the heat dissipation problem becomes more and more serious.   Too high an LED junction temperature not only causes the life of the LED to decay sharply but also causes serious or even fatal effects on the peak wavelength, optical power, luminous flux, and many other performance parameters of the LED.   However, the cooling capacity of the current natural convection heat dissipation, fan-forced heat dissipation, and various heat pipe heat dissipation methods is very limited, and it is difficult to achieve timely heating and external heat dissipation from the surface of the LED wick with high heat intensity so that its temperature is reduced to the ideal range.

Fifth, Highbay body part:

Super cooling capacity: heat flux has reached 400W/cm2, its capacity is 1000 times higher than water cooling, about 100 times higher than heat pipe.

LED chip temperature is low: LED chip operating temperature can be below 60℃. Lightweight and small size: the weight is less than 25% of the existing radiator, and the volume can be as small as 20%.

No power cooling; passive cooling, no fan or pump required, no cooling energy consumption.

Sixth, industrial and mining light applications, are suitable for shipyards, mines, workshops, workshops, warehouses, highway toll stations, gas stations, supermarkets, exhibition halls, stadiums, and other places that need industrial and mining lighting.

Our Highbay light can be used as an emergency lighting. FANXSTAR owns its factory and we can provide a competitive price in the market.

Fanxstar offers bespoke functions lighting for our clients and any particular demand in your projects.

Please refer to: www.triprooflighting.com

Welcome to contact us by email: chikai.zju@fanxstar.com or Tel/Wehat/WhatsApp: +86-13622398932