What Are the Precautions and Installation Methods of the Circular Ceiling Light Installation?

1.Security issues

We had better not choose a ceiling light with a glass cover, and we suggest that the lampshade of the ceiling lamp should be selected as a material that is not easy to damage—most of the customers like the beautiful and atmospheric ceiling light which reflects their high taste.  More and more customers are selecting the high-quality, energy-saving, and beautiful appearance.

2. Check the quality of the light source

All lamp is composed of three parts: electrical appliances, lamp body, and light source. And the most important part is the light source, which can bring a lighting effect. The lamp body is generally decorative and auxiliary. However, electrical appliances are for the stable light source.

3.Light transmission problem

The material of the lampshade should be uniform, and it should not appear as a luminous tube but also have high light transmission. Uneven material will directly affect the brightness of the lamp and is also harmful to our sight. Although some lampshades with poor light transmission are beautiful, they affect the light and are not suitable for selection. The quality of the lamp and the rectifier is directly related to the service life of the ceiling lamp. The lamp with poor quality is prone to blackening, resulting in poor lighting effects.

Installation example: circular ceiling lamp cover

How to change the bulb of a circular ceiling lamp?

1.Customers need to remove the lampshade, and some lampshades can be rotated down. There are three stuck buckles inside the light, as long as pushing the buckles back and taking down the lampshade from the circular ceiling light. There will be a black on the end of the light and the light doesn't work. Remove the plug from the rectifier from the lamp and then open the fixed lamp spring.

2.Take down the lamp and connect the plug of the rectifier with the spring from the new lamp.

3.Put on the lampshade and open the light to be tested.

The process to Installation of circular ceiling light cover

1.Customers need to turn off the power and shut off the circuit breaker and use a voltage tester to confirm wires are not live before touching.

2.Remove the old fixture and unscrew the old light cover. Disconnect wires.

3.Unpack the ceiling light and assemble parts as per instructions.  Then pre-attach wires to the light if required.

4.Hold the mounting plate against the ceiling. Then mark drill holes with a pencil. After drilling holes and inserting wall anchors.

5.Match ceiling wires to light wires, twist wires together, and secure with sire connectors. Tuck wires neatly into the electrical box.

6.Align the mounting plate with the drilled holes and screw the base tightly to the ceiling.

7.Secure the light body to the mounting plate using included screws. Ensure that it's level and flush with the ceiling.

8.Attach the circular cover by aligning clips or twisting it clockwise and press gently until it clicks into place.

9.Turn the circuit breaker back on and test the light with the switch.